What is metal stamping die and process-Himould

What is metal stamping die and process

Release time:

2024-01-20 09:35

Stamping die, also known as punching die, metal die, metal stamping die, the meaning is almost the same. Refers to the use of a mold fixed on the punch or press to exert a certain pressure on the metal or non-metallic sheet, so that the material is separated or formed, so as to obtain a certain size requirements, the appearance of qualified quality parts of the pressure processing method.

The stamping process can be roughly divided into two categories: separation process and forming process (also divided into bending, drawing, forming).

According to the temperature at the time of stamping, there are two ways of cold stamping and hot stamping. This depends on the strength, plasticity, thickness, degree of deformation and equipment capacity of the material, while taking into account the original heat treatment state of the material and the final use conditions.

According to the drawing requirements and customer requirements to determine the size and thickness of the sheet; Cut the sheet to the desired size; When cutting, pay attention to controlling the flatness and verticality of the edge of the plate (if it is necessary to splice, the joint gap should be considered).

Metal stamping parts processing characteristics and advantages

The difference between stamping parts and stretching parts of hardware

Advantages of metal stamping parts

Metal stamping sheet metal processing method

Application of stamping in automotive field